8/8 (16) el 50/70MHz Yagi (8.0m)
An Excellent Dual Band Yagi for 50/70MHz with 8.0m boom
The 4-6-16 Dual Band Yagi has a total of 16 elements, 8 elements are used on 70MHz while 8 elements are used on 50MHz. The 4-6-16 InnovAntennas Dual Band Yagi stands aside from the crowd due to the methods used for its design. The 4-6-16 uses no traps or coils, no phasing arrangements and has no need for 'compromise' spacing between elements as the antenna has a set of correctly spaced elements for either band but still deploys only one feed point. An excellent antenna with great SWR bandwidth and performance in one package.
Gain on 50MHz: 12.30dBi @ 50.150MHz
F/B on 50MHz: 18.48dB @ 50.150MHz
Gain on 50MHz at 10m above Ground: 17.69dBi
Gain on 70MHz: 12.21dBi @ 70.200MHz
F/B on 70MHz: 19.04dB @ 70.200MHz
Gain on 70MHz at 10m above Ground: 17.83dBi
Power Rating: 3kw
SWR 50MHz: Below 1.2:1 from 50.00MHz to 50.500MHz
SWR 70MHz: Below 1.3:1 from 69.900MHz to 70.500MHz
Boom Length: 8.05m
Weight: 9.35Kg / 20.6LB
Turning Radius: 3.991m / 13.09ft
Wind Loading: 0.29 Square Metres / 3.13 Square feet
Wind Survival: 169KPH / 105MPH
Other options available if higher wind loading/survival is required.
This antenna is made 1/2 inch (12.7mm) center elements and 3/8 inch (9.525mm) outer elements (70MHz element are one piece 1/2 inch). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 1.5 inch square 16SWG aluminum and a Kevlar boom guy is supplied with stainless steel turnbuckles for final guy adjustment.
Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.
Note: much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here
- Marine grade Stainless Steel Fittings
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy